Land Rover Automotive Smart Anti-Theft System Training Platform
This training platform is designed to demonstrate the operating principles of the Land Rover smart anti-theft system. It integrates vehicle security control, key recognition, electronic control modules, and engine start components to help students understand system architecture and operating principles while developing practical skills in automotive electronic testing, fault analysis, and maintenance.
LAUNCH AIOBD (NueraDiag) Full System Diagnostic Scanner for iOS and Android Multi-Language Global Version
- With LAUNCH AIOBD hardware connector to get OBDII related free testing, one key to get all static data of OBDII, in addition to Smog Check, OBFCM, and OBD top ten modes all functions.
- It can also get fault information of all systems of the vehicle, and unlock the software of the model to get advanced functions such as reading fault code, clearing fault code, reading version information, reading data flow, action test, maintenance function, ECU coding and so on.
- LAUNCH DOIP Cable for CRP123X/ E/ I V3 , CRP 129X/E/I V3, CPR 129 PLUS V3
LAUNCH BST360 Car Battery tester Analysis 6V12V 2000CCA Voltage Battery Test Clip Charging Cricut Load tool for X431 V/V+/Pros/PRO3S+/Pro5/P
LAUNCH BST360 Car Bluetooth Battery Tester is a new generation of 6V/12V lead-acid battery test clip that supports Bluetooth wireless communication.
It is used for measuring the actual Cold Cranking Ampere(CCA) of the car starter battery, analyzing the battery health, and detecting the starting system and the charging system of the car.
It is used for measuring the actual Cold Cranking Ampere(CCA) of the car starter battery, analyzing the battery health, and detecting the starting system and the charging system of the car.
Launch X-431 Sensorbox S2-2 DC USB Oscilloscope 2 Channels Handheld Sensor Simulator and Tester for X431 PAD V PAD VII Pro3 APEX Pro5 Pro3s+
Professional automotive sensor signal simulator module with multimeter.
Launch new S2-2 Sensorbox it is designed to test and simulate most vehicle sensors. quickly troubleshooting the ECU.it can be compatible with Launch V 5.0, Pros V5.0, V+, Pro3s+, Pro5, Pro TT, Pro3 ACE, Pro Dyno, Pro3 APEX, PAD III, PAD V, PAD VII, PAD V Elite, PAD VII Elite etc, to maximize the repair shop revenue.
Launch new S2-2 Sensorbox it is designed to test and simulate most vehicle sensors. quickly troubleshooting the ECU.it can be compatible with Launch V 5.0, Pros V5.0, V+, Pro3s+, Pro5, Pro TT, Pro3 ACE, Pro Dyno, Pro3 APEX, PAD III, PAD V, PAD VII, PAD V Elite, PAD VII Elite etc, to maximize the repair shop revenue.
LAUNCH X-431 XPROG-5 G5 IMMO Programmer 3-in-1 Supports Key Matching, 5C 5D Key Programming, ECU/TCU Cloning & Writing Update From GIII
LAUNCH G5 Immobilizer Programmer is a professional 3-in-1 IMMO device for European vehicles, integrating advanced key matching, universal remote key programming, and comprehensive ECU/TCU (Engine and Transmission) cloning and writing functions.
It serves as a significant Upgrade version of Xprog-3. Combines the X-431 PROG3, PC Adapter, ECU programmer, and X431 Key Programmer into a single device.
It offers enhanced coverage for immobilizer programming and module cloning.
It serves as a significant Upgrade version of Xprog-3. Combines the X-431 PROG3, PC Adapter, ECU programmer, and X431 Key Programmer into a single device.
It offers enhanced coverage for immobilizer programming and module cloning.
Launch X431 PAD VII Pad 7 Elite with SmartLink C Supports ADAS, Topology Mapping, 60 Service Functions, TPMS, Online Programming with Free C
- Upgraded on Top of Launch X431 V+/PROS V/X431 PADIII to Rival the OEM Automotive Diagnostic Tools
- ECU Programming & Coding: J2534/RP1210/D-PDU/Do-IP/CANFD Diagnostic Protocols
- Intelligent Diagnose & Guided Functions, 50+ Services & Topology Map
- Supports ADAS calibration and eight extended modules such as videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer, and battery tester.
LEKE 008 High Performance BGA Rework Station
LEKE 008 BGA Rework Station
It is a professional chip repair device for laptop and automotive ECU motherboards.
With 8-stage precision temperature control, it comes with an electric vacuum pen and T-slot PCB supports to avoid board deformation.
The special nozzle ensures even hot air, protecting chips from overheating during soldering.
Lonsdor FP-30 FP30 30 PIN 30-PIN Cable for Toyota 2022- 8A-BA and 4A-BA Proximity without PIN Code Works with K518ISE K518S AUTEL XHORSE X43
Used with OBDII tools from AUTEL, LAUNCH X431,XHORSE, OBDSTAR, ect.
- Adds Toyota Corolla Cross (2022-), Frontlander (2022-) 4A-BA Proximity (board number 1320 2561) add key and all keys lost
- Adds 2022- BZ4X, Granvia, Harrier, Venza, Sienna, Wildlander, Sequoia, Tundra, Land Cruiser 8A-BA type add key and all keys lost without pin code
Lonsdor K518 PRO Full Version Key Programmer with Built-in GM CAN FD Toyota Emulator Get Free Toyota JLR Nissan Volvo License
- Lonsdor K518 PRO, 2nd generation product of K518, is a versatile key programming device released by Lonsdor, designed specifically for the technician and locksmiths.
- Integrated with all functions and features of K518ISE, this tablet device shows more advantages and functionality.
- 2 years Free Update, with Free Toyota AKL Activation / JLR License / Nissan License / Volvo License
- Full Version with 2pcs LT20, Toyota FP30 Cable, Nissan 40 BCM Cable, JCD, JLR and ADP Adapter
Mercedes new audio testing platform wiring
This ABS pump bench test harness is designed for automotive technicians, electronic control unit (ECU) repair specialists, and professional automotive workshops. It simplifies bench connections for testing compatible ABS and related control modules.
Key Features:
-
Designed for Mercedes-Benz ABS pump bench testing.
-
Supports connections to compatible ignition lock modules.
-
Includes a parking brake module connection.
-
Integrated wiring harness for convenient electrical connectivity.
-
Equipped with a power connector for bench testing.
-
Suitable for automotive electronic diagnostics and troubleshooting.
Mercedes-Benz W204 3rd Generation FBS Smart Anti-Theft System Training Platform
This training platform is designed for studying the Mercedes-Benz W204 3rd Generation FBS anti-theft system. It integrates ignition control, smart key recognition, start control, and diagnostic components to help students understand the system structure and operating principles while developing practical skills in automotive electronic testing, fault analysis, and
Mercedes-Benz W205 ISM Test Bench
Designed for automotive technicians and ECU repair specialists, this test bench provides a convenient platform for bench testing and evaluating vehicle electronic modules without requiring installation in the vehicle. It supports the following modules:
-
M274 Engine ECU
-
Transmission ECU 4-4
-
A80 ISM Module
-
CPC Powertrain Module
-
Instrument Cluster
-
Electronic Ignition Switch
-
N80 Gear Selector
